path: root/debian/po/zh_CN.po

# debconf templates for xorg-x11 package
# Simplified Chinese translation
#
# $Id: zh_CN.po 490 2005-08-03 09:59:07Z ender $
#
# Copyrights:
# Branden Robinson, 2000-2004
# Kov Chai <tchaikov@gmail.com>, 2008
# Carlos Z.F. Liu <carlosliu@users.sourceforge.net>, 2005, 2006
# Haifeng Chen <optical.dlz@gmail.com>, 2006
# Ming Hua <minghua@rice.edu>, 2005
#
# This file is distributed under the same license as the xorg-x11 package.
# Please see debian/copyright.
#
#    Translators, if you are not familiar with the PO format, gettext
#    documentation is worth reading, especially sections dedicated to
#    this format, e.g. by running:
#         info -n '(gettext)PO Files'
#         info -n '(gettext)Header Entry'
#
#    Some information specific to po-debconf are available at
#            /usr/share/doc/po-debconf/README-trans
#         or http://www.debian.org/intl/l10n/po-debconf/README-trans
#
#    Developers do not need to manually edit POT or PO files.
#
msgid ""
msgstr ""
"Project-Id-Version: 6.8.2.dfsg.1-4+SVN\n"
"Report-Msgid-Bugs-To: xorg@packages.debian.org\n"
"POT-Creation-Date: 2009-06-02 20:32+0200\n"
"PO-Revision-Date: 2008-06-09 13:20+0800\n"
"Last-Translator: Kov Chai <tchaikov@gmail.com>\n"
"Language-Team: Debian Chinese [GB] <debian-chinese-gb@lists.debian.org>\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Plural-Forms: nplurals=1; plural=0;\n"

#. Type: select
#. Choices
#: ../x11-common.templates:2001
msgid "Root Only"
msgstr "仅根(root)用户"

#. Type: select
#. Choices
#: ../x11-common.templates:2001
msgid "Console Users Only"
msgstr "仅控制台(console)用户"

#. Type: select
#. Choices
#: ../x11-common.templates:2001
msgid "Anybody"
msgstr "任何用户"

#. Type: select
#. Description
#: ../x11-common.templates:2002
msgid "Users allowed to start the X server:"
msgstr "允许启动 X 服务器的用户："

#. Type: select
#. Description
#: ../x11-common.templates:2002
msgid ""
"Because the X server runs with superuser privileges, it may be unwise to "
"permit any user to start it, for security reasons.  On the other hand, it is "
"even more unwise to run general-purpose X client programs as root, which is "
"what may happen if only root is permitted to start the X server.  A good "
"compromise is to permit the X server to be started only by users logged in "
"to one of the virtual consoles."
msgstr ""
"因为 X 服务器是以超级用户权限运行，所以从安全角度来说，允许任何用户启动它不是"
"一个明智的选择。在另一方面，以根(root)用户身份运行一般用途的 X 客户端程序则是"
"更加愚蠢的做法，这在仅允许根(root)用户启动 X 服务器时可能会发生。较好的解决办"
"法是允许那些能登录到虚拟控制台的用户启动 X 服务器。"

#~ msgid "Nice value for the X server:"
#~ msgstr "X 服务器使用的 nice 值 (即优先值)："

#~ msgid ""
#~ "When using operating system kernels with a particular scheduling "
#~ "strategy, it has been widely noted that the X server's performance "
#~ "improves when it is run at a higher process priority than the default; a "
#~ "process's priority is known as its \"nice\" value.  These values range "
#~ "from -20 (extremely high priority, or \"not nice\" to other processes) to "
#~ "19 (extremely low priority).  The default nice value for ordinary "
#~ "processes is 0, and this is also the recommend value for the X server."
#~ msgstr ""
#~ "如果在操作系统内核中使用某种调度策略，一个很普遍的看法是让 X 服务器在比默"
#~ "认优先级更高的进程中运行能够提升其表现；一个进程的优先级也叫做它"
#~ "的“nice”值。优先级的范围从 -20 (极高的优先级，或者说对其它进程“不 nice”) "
#~ "到 19 (极低的优先级)。普通进程的默认 nice 值是 0，这也是 X 服务器的推荐"
#~ "值。"

#~ msgid ""
#~ "Values outside the range of -10 to 0 are not recommended; too negative, "
#~ "and the X server will interfere with important system tasks.  Too "
#~ "positive, and the X server will be sluggish and unresponsive."
#~ msgstr ""
#~ "不推荐使用超出 -10 到 0 范围的值。如果设置太小，X 服务器会干扰其它重要的系"
#~ "统任务；如果设置得太大，X 服务器就会变得缓慢和迟钝。"

#~ msgid "Incorrect nice value"
#~ msgstr "错误的 nice 值"

#~ msgid "Please enter an integer between -20 and 19."
#~ msgstr "请输入一个大于 -20 且小于 19 的整数。"

#~ msgid "Major possible upgrade issues"
#~ msgstr "严重的升级问题"

#~ msgid ""
#~ "Some users have reported that upon upgrade to the current package set, "
#~ "their xserver package was no longer installed. Because there is no easy "
#~ "way around this problem, you should be sure to check that the xserver-"
#~ "xorg package is installed after upgrade. If it is not installed and you "
#~ "require it, it is recommended that you install the xorg package to make "
#~ "sure you have a fully functional X setup."
#~ msgstr ""
#~ "有些用户报告过，在升级到当前最新的软件集后，他们的 xserver 软件包却没有被"
#~ "安装。由于对此问题并没有一个简单的解决办法，您应该在升级后检查 xserver-"
#~ "xorg 软件包是否被安装。如果没有安装而且您需要它，推荐您安装 xorg 软件包以"
#~ "确保您拥有一个全功能的 X 设置。"

#~ msgid "Cannot remove /usr/X11R6/bin directory"
#~ msgstr "无法移除 /usr/X11R6/bin 目录"

#~ msgid ""
#~ "This upgrade requires that the /usr/X11R6/bin directory be removed and "
#~ "replaced with a symlink. An attempt was made to do so, but it failed, "
#~ "most likely because the directory is not yet empty. You must move the "
#~ "files that are currently in the directory out of the way so that the "
#~ "installation can complete. If you like, you may move them back after the "
#~ "symlink is in place."
#~ msgstr ""
#~ "本升级过程需要将 /usr/X11R6/bin 目录删除并将其替换为一个符号链接。程序已经"
#~ "尝试这样做，却遭到失败，最可能的原因是该目录并未清空。您必须将该目录下目前"
#~ "所有的文件移出，让安装程序可以顺利完成。如果您想的话，也可以在符号链接创建"
#~ "后将文件移回来。"

#~ msgid ""
#~ "This package installation will now fail and exit so that you can do this. "
#~ "Please re-run your upgrade procedure after you have cleaned out the "
#~ "directory."
#~ msgstr ""
#~ "本软件包安装失败并将退出，以让您完成所述的工作。请在清除目录后重新运行您的"
#~ "升级程序。"

#~ msgid "Video card's bus identifier:"
#~ msgstr "请输入显示卡的通道标识符 (bus identifier)："

#~ msgid ""
#~ "Users of PowerPC machines, and users of any computer with multiple video "
#~ "devices, should specify the BusID of the video card in an accepted bus-"
#~ "specific format."
#~ msgstr ""
#~ "PowerPC 机器用户，以及任何带有多个视频显示设备的计算机用户，都应该使用可被"
#~ "接受的 bus 专用格式来设定显示卡的 BusID，。"

#~ msgid "Examples:"
#~ msgstr "例如："

#~ msgid ""
#~ "For users of multi-head setups, this option will configure only one of "
#~ "the heads.  Further configuration will have to be done manually in the X "
#~ "server configuration file, /etc/X11/xorg.conf."
#~ msgstr ""
#~ "对于使用多头设定的用户，此选项将仅仅配置其中一个显示设备。接下来，您还需要"
#~ "手动编辑 X 的配置文件，/etc/X11/xorg.conf。"

#~ msgid ""
#~ "You may wish to use the \"lspci\" command to determine the bus location "
#~ "of your PCI, AGP, or PCI-Express video card."
#~ msgstr ""
#~ "您也许会想使用“lspci”命令来确定您的 PCI、AGP 或 PCI-Express 显示卡的通道位"
#~ "置。"

#~ msgid ""
#~ "When possible, this question has been pre-answered for you and you should "
#~ "accept the default unless you know it doesn't work."
#~ msgstr ""
#~ "如果可能的话，此问题应该已经被预设好了答案。除非您知道该设置不能工作，否则"
#~ "您应该接受之。"

#~ msgid "Incorrect format for the bus identifier"
#~ msgstr "通道号 (bus identifier) 的格式错误"

#~ msgid "Use kernel framebuffer device interface?"
#~ msgstr "是否使用内核帧缓冲设备接口？"

#~ msgid ""
#~ "Rather than communicating directly with the video hardware, the X server "
#~ "may be configured to perform some operations, such as video mode "
#~ "switching, via the kernel's framebuffer driver."
#~ msgstr ""
#~ "X 服务器还可以被配置为通过内核的帧缓冲驱动来执行某些操作 (例如视频模式切"
#~ "换)，而非直接与视频硬件进行通讯。"

#~ msgid ""
#~ "In theory, either approach should work, but in practice, sometimes one "
#~ "does and the other does not.  Enabling this option is the safe bet, but "
#~ "feel free to turn it off if it appears to cause problems."
#~ msgstr ""
#~ "在理论上，两种途径都应该能工作。但在实践中，常常是一个可以而另一个不行。开"
#~ "启此选项可以看作是安全保险，但如果它造成了某些问题，您完全可以将其关闭。"

#~ msgid "XKB rule set to use:"
#~ msgstr "请选择要使用的 XKB 规则集："

#~ msgid ""
#~ "For the X server to handle the keyboard correctly, an XKB rule set must "
#~ "be chosen."
#~ msgstr "要使 X 服务器能正确处理您的键盘，您必须选择一个 XKB 规则集。"

#~ msgid "Users of most keyboards should enter \"xorg\"."
#~ msgstr "绝大部分键盘的用户都应该输入“xorg”。"

#~ msgid ""
#~ "Experienced users can use any defined XKB rule set.  If the xkb-data "
#~ "package has been unpacked, see the /usr/share/X11/xkb/rules directory for "
#~ "available rule sets."
#~ msgstr ""
#~ "有经验的用户可以使用任何已定义的 XKB 规则集。如果 xkb-data 软件包已被解"
#~ "包，请到 /usr/share/X11/xkb/rules 目录下查找可用的规则集。"

#~ msgid "When in doubt, this value should be set to \"xorg\"."
#~ msgstr "如果您有所疑惑，此项值应该被设为“xorg”。"

#~ msgid "Keyboard model:"
#~ msgstr "键盘型号："

#~ msgid ""
#~ "For the X server to handle the keyboard correctly, a keyboard model must "
#~ "be entered.  Available models depend on which XKB rule set is in use."
#~ msgstr ""
#~ "要使 X 服务器能正确处理您的键盘，您必须输入一个键盘型号。可用的型号依赖于"
#~ "使用哪种 XKB 规则集。"

#~ msgid ""
#~ " With the \"xorg\" rule set:\n"
#~ " - pc101: traditional IBM PC/AT style keyboard with 101 keys, common in\n"
#~ "          the United States.  Has no \"logo\" or \"menu\" keys;\n"
#~ " - pc104: similar to pc101 model, with additional keys, usually engraved\n"
#~ "          with a \"logo\" symbol and a \"menu\" symbol;\n"
#~ " - pc102: similar to pc101 and often found in Europe. Includes a \"< >\" "
#~ "key;\n"
#~ " - pc105: similar to pc104 and often found in Europe. Includes a \"< >\" "
#~ "key;\n"
#~ " - macintosh: Macintosh keyboards using the new input layer with Linux\n"
#~ "              keycodes;\n"
#~ " - macintosh_old: Macintosh keyboards not using the new input layer;\n"
#~ " - type4: Sun Type4 keyboards;\n"
#~ " - type5: Sun Type5 keyboards."
#~ msgstr ""
#~ " “xorg”规则集：\n"
#~ " - pc101：传统 101 键 IBM PC/AT 式样键盘，常见于美国。不带“徽标”和“菜"
#~ "单”键；\n"
#~ " - pc104：类似于 pc101 型号，带有附加键，通常刻有一个“徽标”和一个“菜单”符"
#~ "号；\n"
#~ " - pc102：类似于 pc101，常见于欧洲。包含一个“< >”键；\n"
#~ " - pc105：类似于 pc104，常见于欧洲。包含一个“< >”键；\n"
#~ " - macintosh：使用 linux 键码 (keycodes) 的新输入布局的麦金塔键盘；\n"
#~ " - macintosh_old：未使用新输入布局的麦金塔键盘；\n"
#~ " - type4：Sun Type4 键盘；\n"
#~ " - type5：Sun Type5 键盘。"

#~ msgid ""
#~ "Laptop keyboards often do not have as many keys as standalone models; "
#~ "laptop users should select the keyboard model most closely approximated "
#~ "by the above."
#~ msgstr ""
#~ "笔记本电脑键盘通常没有标准键盘那么多键。用户应该选择一个大致上最接近以上所"
#~ "列键盘的型号。"

#~ msgid ""
#~ "Experienced users can use any model defined by the selected XKB rule "
#~ "set.  If the xkb-data package has been unpacked, see the /usr/share/X11/"
#~ "xkb/rules directory for available rule sets."
#~ msgstr ""
#~ "有经验的用户可以使用任何由被选 XKB 规则集所定义的键盘型号。如果 xkb-data "
#~ "软件包已被解包，请到 /usr/share/X11/xkb/rules 目录下查找可用的规则集。"

#~ msgid ""
#~ "Users of U.S. English keyboards should generally enter \"pc104\".  Users "
#~ "of most other keyboards should generally enter \"pc105\"."
#~ msgstr ""
#~ "美国英语键盘用户通常应该输入“pc104”。大部分其它键盘的用户通常应该输"
#~ "入“pc105”。"

#~ msgid "Keyboard layout:"
#~ msgstr "键盘布局："

#~ msgid ""
#~ "For the X server to handle the keyboard correctly, a keyboard layout must "
#~ "be entered.  Available layouts depend on which XKB rule set and keyboard "
#~ "model were previously selected."
#~ msgstr ""
#~ "要使 X 服务器能正确处理您的键盘，您必须输入一个键盘布局。可用的布局依赖于"
#~ "您前面所选择的 XKB 规则集和键盘型号。"

#~ msgid ""
#~ "Experienced users can use any layout supported by the selected XKB rule "
#~ "set.  If the xkb-data package has been unpacked, see the /usr/share/X11/"
#~ "xkb/rules directory for available rule sets."
#~ msgstr ""
#~ "有经验的用户可以使用任何由被选 XKB 规则集所支持布局。如果 xlibs 软件包已被"
#~ "解包，请到 /usr/share/X11/xkb/rules 目录下查找可用的规则集。"

#~ msgid ""
#~ "Users of U.S. English keyboards should enter \"us\".  Users of keyboards "
#~ "localized for other countries should generally enter their ISO 3166 "
#~ "country code.  E.g., France uses \"fr\", and Germany uses \"de\"."
#~ msgstr ""
#~ "美国英语键盘用户应该输入“us”。使用其它国家特有键盘的用户通常应该输入其国家"
#~ "的 ISO 3166 国家代码。例如，法国用户应该使用“fr”，德国用户应该使用“de”。"

#~ msgid "Keyboard variant:"
#~ msgstr "键盘变种 (variant)："

#~ msgid ""
#~ "For the X server to handle the keyboard as desired, a keyboard variant "
#~ "may be entered.  Available variants depend on which XKB rule set, model, "
#~ "and layout were previously selected."
#~ msgstr ""
#~ "要使 X 服务器能按照您的期望处理键盘，您必须输入一个键盘变种 (variant)。可"
#~ "用的种类依赖于您前面所选择的 XKB 规则集、键盘型号和布局。"

#~ msgid ""
#~ "Many keyboard layouts support an option to treat \"dead\" keys such as "
#~ "non-spacing accent marks and diaereses as normal spacing keys, and if "
#~ "this is the preferred behavior, enter \"nodeadkeys\"."
#~ msgstr ""
#~ "有许多键盘布局支持一个处理“dead”键的选项，例如将非空格的音调符号和分音符作"
#~ "为普通空格键使用。如果这是您期望的工作方式，请输入“nodeadkeys”。"

#~ msgid ""
#~ "Experienced users can use any variant supported by the selected XKB "
#~ "layout.  If the xkb-data package has been unpacked, see the /usr/share/"
#~ "X11/xkb/symbols directory for the file corresponding to your selected "
#~ "layout for available variants."
#~ msgstr ""
#~ "有经验的用户可以使用任何由被选 XKB 布局所支持的变种 (variant)。如果 xkb-"
#~ "data 软件包已被解包，请到 /usr/share/X11/xkb/symbols 目录下查找对应于您所"
#~ "选布局的可用变种。"

#~ msgid ""
#~ "Users of U.S. English keyboards should generally leave this entry blank."
#~ msgstr "美国英语键盘用户通常应该将此栏留空。"

#~ msgid "Keyboard options:"
#~ msgstr "键盘选项："

#~ msgid ""
#~ "For the X server to handle the keyboard as desired, keyboard options may "
#~ "be entered.  Available options depend on which XKB rule set was "
#~ "previously selected.  Not all options will work with every keyboard model "
#~ "and layout."
#~ msgstr ""
#~ "要使 X 服务器能按照您的期望处理键盘，您可能需要输入键盘选项。可用的选项依"
#~ "赖于您前面所选择的 XKB 规则集。并不是所有的选项都能在每种键盘型号和布局上"
#~ "工作。"

#~ msgid ""
#~ "For example, if you wish the Caps Lock key to behave as an additional "
#~ "Control key, you may enter \"ctrl:nocaps\"; if you would like to switch "
#~ "the Caps Lock and left Control keys, you may enter \"ctrl:swapcaps\"."
#~ msgstr ""
#~ "例如，如果您想将 Caps Lock 键当成额外的 Control 键使用，就需要输入“ctrl:"
#~ "nocaps”；如果您想将 Caps Lock 键与左 Control 键交换使用，就需要输入“ctrl:"
#~ "swapcaps”。"

#~ msgid ""
#~ "As another example, some people prefer having the Meta keys available on "
#~ "their keyboard's Alt keys (this is the default), while other people "
#~ "prefer having the Meta keys on the Windows or \"logo\" keys instead.  If "
#~ "you prefer to use your Windows or logo keys as Meta keys, you may enter "
#~ "\"altwin:meta_win\"."
#~ msgstr ""
#~ "再举一个例子，有些人喜欢将 Meta 键设到键盘的 Alt 键上 (这是默认的设置)，然"
#~ "而其他人可能更希望将 Meta 键放到 Windows 或“logo”键上。如果您想将 Windows "
#~ "或 logo 键当成 Meta 键使用，就需要输入“altwin:meta_win”。"

#~ msgid ""
#~ "You can combine options by separating them with a comma, for instance "
#~ "\"ctrl:nocaps,altwin:meta_win\"."
#~ msgstr ""
#~ "您可以组合多个选项，并用逗号来分隔，比如“ctrl:nocaps,altwin:meta_win”。"

#~ msgid ""
#~ "Experienced users can use any options compatible with the selected XKB "
#~ "model, layout and variant."
#~ msgstr "有经验的用户可以使用任何兼容于所选 XKB 型号、布局和变种的选项。"

#~ msgid "When in doubt, this value should be left blank."
#~ msgstr "如果您有所疑惑，此项值应该被置空。"

#~ msgid "Empty value"
#~ msgstr "空值"

#~ msgid "A null entry is not permitted for this value."
#~ msgstr "此栏不能为空值。"

#~ msgid "Invalid double-quote characters"
#~ msgstr "无效的双引号字符"

#~ msgid "Double-quote (\") characters are not permitted in the entry value."
#~ msgstr "此栏的值中不能带有双引号 (\") 字符。"

#~ msgid "Numerical value needed"
#~ msgstr "需要数字字符"

#~ msgid "Characters other than digits are not allowed in the entry."
#~ msgstr "此栏中不能有数字以外的字符。"

#~ msgid "Autodetect keyboard layout?"
#~ msgstr "自动探测键盘布局？"

#~ msgid ""
#~ "The default keyboard layout selection for the Xorg server will be based "
#~ "on a combination of the language and the keyboard layout selected in the "
#~ "installer."
#~ msgstr ""
#~ "Xorg 服务器的默认键盘布局选择是基于安装程序 (installer) 中的语言和键盘布局"
#~ "选择而作出的决定。"

#~ msgid ""
#~ "Choose this option if you want the keyboard layout to be redetected.  Do "
#~ "not choose it if you want to keep your current layout."
#~ msgstr ""
#~ "如果您想重新探测键盘布局，请选中此项。如果您要保持现有布局，则不要选中它。"

#~ msgid "X server driver:"
#~ msgstr "X 服务器驱动："

#~ msgid ""
#~ "For the X Window System graphical user interface to operate correctly, it "
#~ "is necessary to select a video card driver for the X server."
#~ msgstr ""
#~ "要正确显示和使用 X 窗口系统的图形用户界面，您必须为 X 服务器选择一个显示卡"
#~ "驱动。"

#~ msgid ""
#~ "Drivers are typically named for the video card or chipset manufacturer, "
#~ "or for a specific model or family of chipsets."
#~ msgstr ""
#~ "驱动通常都被命名为显示卡或显示芯片厂商，或者是某个特定型号或芯片族的名称。"

#~ msgid ""
#~ "Users of most keyboards should enter \"xorg\".  Users of Sun Type 4 and "
#~ "Type 5 keyboards, however, should enter \"sun\"."
#~ msgstr ""
#~ "绝大部分键盘的用户都应该输入“xorg”，但是 Sun Type 4 和 Type 5 键盘的用户应"
#~ "该输入“sun”。"

#~ msgid "Attempt to autodetect video hardware?"
#~ msgstr "尝试自动探测视频显示硬件设备吗？"

#~ msgid ""
#~ "You should choose this option if you would like to attempt to autodetect "
#~ "the recommended X server and driver module for your video card.  If the "
#~ "autodetection fails, you will be asked to specify the desired X server "
#~ "and/or driver module.  If it succeeds, further configuration questions "
#~ "about your video hardware will be pre-answered."
#~ msgstr ""
#~ "如果您想尝试让程序自动探测适合您的显示卡的的 X 服务器和驱动模块，请接受此"
#~ "选项。如果自动探测失败，程序会要求您指定合适的 X 服务器 和/或 驱动模块。如"
#~ "果自动探测成功，接下来有关您的视频显示设备的 debconf 问题会被预设好答案。"

#~ msgid ""
#~ "If you would rather select the X server and driver module yourself, do "
#~ "not choose this option.  You will not be asked to select the X server if "
#~ "there is only one available."
#~ msgstr ""
#~ "如果您更愿意自已手动选择 X 服务器和驱动模块，请拒绝此选项。当然，如果只有"
#~ "一个可用的 X 服务器，您并不会被要求进行选择。"

#~ msgid "Multiple potential default X.Org server drivers for the hardware"
#~ msgstr "有多个可能的默认 X.Org 服务器驱动适用于您的硬件"

#~ msgid ""
#~ "Multiple video cards have been detected, and different X servers are "
#~ "required to support the various devices.  It is thus not possible to "
#~ "automatically select a default X server."
#~ msgstr ""
#~ "程序已探测到多张显示卡，并且需要使用不同的 X 服务器来支持各个不同的设备。"
#~ "因此，本程序无法自动选择一个默认的 X 服务器。"

#~ msgid ""
#~ "Please configure the device that will serve as this computer's \"primary "
#~ "head\"; this is generally the video card and monitor used for display "
#~ "when the computer is booted up."
#~ msgstr ""
#~ "请设置将作为本计算机“主显示设备”(又称“主头”，primary head) 的设备。这通常"
#~ "是当计算机启动时用来显示信息的显卡。"

#~ msgid ""
#~ "The configuration process currently only supports single-headed setups; "
#~ "however, the X server configuration files can be edited later to support "
#~ "a multi-head configuration."
#~ msgstr ""
#~ "配置过程目前仅支持单头设定。但是，稍后可以通过直接编辑 X 服务器配置文件来"
#~ "支持多头配置。"

#~ msgid "Identifier for your video card:"
#~ msgstr "请为您的显示卡输入一个标识符："

#~ msgid ""
#~ "The X server configuration file associates your video card with a name "
#~ "that you may provide.  This is usually the vendor or brand name followed "
#~ "by the model name, e.g., \"Intel i915\", \"ATI RADEON X800\", or \"NVIDIA "
#~ "GeForce 6600\"."
#~ msgstr ""
#~ "X 服务器配置文件将把您的显示卡与您所提供的名称对应。这通常是厂商或品牌名称"
#~ "加上型号名称，例如：“Intel i915”、“ATI RADEON X800”或“NCIDIA GeForce "
#~ "6600”。"

#~ msgid "Generic Video Card"
#~ msgstr "通用显示卡"

#~ msgid "Video modes to be used by the X server:"
#~ msgstr "X 服务器所使用的视频模式："

#~ msgid ""
#~ "Please keep only the resolutions you would like the X server to use.  "
#~ "Removing all of them is the same as removing none, since in both cases "
#~ "the X server will attempt to use the highest possible resolution."
#~ msgstr ""
#~ "请仅保留您想让 X 服务器使用的分辩率。把所有选项都删除和什么都不删除的效果"
#~ "是一样的，因为两种情况下 X 服务器都会尝试使用可能的最高分辨率。"

#~ msgid "Attempt monitor autodetection?"
#~ msgstr "尝试显示器自动探测吗？"

#~ msgid ""
#~ "Many monitors (including LCD's) and video cards support a communication "
#~ "protocol that allows the monitor's technical characteristics to be "
#~ "communicated back to the computer.  If the monitor and video card support "
#~ "this protocol, further configuration questions about the monitor will be "
#~ "pre-answered."
#~ msgstr ""
#~ "许多显示器 (包括 LCD) 和显示卡都支持一种允许将显示卡的技术参数特性传递回计"
#~ "算机的通讯协议。如果您的显示器和显示卡支持该协议，接下来有关您的显示器的配"
#~ "置问题将被预置好答案。"

#~ msgid ""
#~ "If autodetection fails, you will be asked for information about the "
#~ "monitor."
#~ msgstr "如果自动探测失败，程序会询问有关您的显示器的信息。"

#~ msgid "Method for selecting the monitor characteristics:"
#~ msgstr "请选取一种选择您的显示器特性的方法："

#~ msgid ""
#~ "For the X Window System graphical user interface to operate correctly, "
#~ "certain characteristics of the monitor must be known."
#~ msgstr ""
#~ "要使 X 窗口系统的图形用户界面能正常操作，程序必须知道您的显示器某些特性。"

#~ msgid ""
#~ "The \"simple\" option will prompt about the monitor's physical size; this "
#~ "will set some configuration values appropriate for a typical CRT of the "
#~ "corresponding size, but may be suboptimal for high-quality CRT's."
#~ msgstr ""
#~ "如果采用“简单”方法，您只需要知道您的显示器的物理尺寸，这样程序会按照该尺寸"
#~ "的典型 CRT 显示器来设置参数，但是对于高级 CRT 显示器来说可能并非最佳。"

#~ msgid ""
#~ "The \"medium\" option will present you with a list of resolutions and "
#~ "refresh rates, such as \"800x600 @ 85Hz\"; you should choose the best "
#~ "mode you wish to use (and that you know the monitor is capable of)."
#~ msgstr ""
#~ "如果采用“中等”方法，您将看到一个分辨率和刷新频率的列表，例如“800x600 @ "
#~ "85Hz”，您应当选择你想要使用 (并且知道您的显示器能够支持) 的最佳模式。"

#~ msgid ""
#~ "The \"advanced\" option will let you specify the monitor's horizontal "
#~ "sync and vertical refresh tolerances directly."
#~ msgstr ""
#~ "如果采用“高级”方法，您将直接指定您的显示器的水平同步频率和垂直刷新频率的可"
#~ "用范围。"

#~ msgid "Up to 14 inches (355 mm)"
#~ msgstr "小于等于 14 英寸 (355 毫米)"

#~ msgid "15 inches (380 mm)"
#~ msgstr "15 英寸 (380 毫米)"

#~ msgid "17 inches (430 mm)"
#~ msgstr "17 英寸 (430 毫米)"

#~ msgid "19-20 inches (480-510 mm)"
#~ msgstr "19-20 英寸 (480-510 毫米)"

#~ msgid "21 inches (530 mm) or more"
#~ msgstr "21 英寸 (530 毫米) 或更大"

#~ msgid "Approximate monitor size:"
#~ msgstr "显示器的大概尺寸："

#~ msgid ""
#~ "High-quality CRT's may be able to use the next highest size category."
#~ msgstr "高级 CRT 显示器可能能够使用比其实际尺寸更高一级的设置。"

#~ msgid "Monitor's best video mode:"
#~ msgstr "显示器的最佳显示模式："

#~ msgid ""
#~ "Choose the \"best\" resolution and refresh rate the monitor is capable "
#~ "of.  Larger resolutions and refresh rates are better.  With a CRT "
#~ "monitor, it is perfectly acceptable to select a \"worse\" video mode than "
#~ "the monitor's best if you wish.  Users of LCD displays may also be able "
#~ "to do this, but only if both the video chipset and the driver support it; "
#~ "if in doubt, use the video mode recommended by the manufacturer of your "
#~ "LCD."
#~ msgstr ""
#~ "请选择您认为您的显示器所能使用的“最佳”的分辨率和刷新频率。分辨率和刷新频率"
#~ "都是越高越好。如果您使用的是 CRT 显示器，您完全可以根据您的需要选择一个比"
#~ "您的显示器所能达到的最高水平要“差”的显示模式。LCD 显示器的用户如果要这么"
#~ "做，则需要显示芯片和驱动程序两者都支持才行；如果您不清楚，请使用您的 LCD "
#~ "的制造商所推荐的显示模式。"

#~ msgid "Generic Monitor"
#~ msgstr "通用显示器"

#~ msgid "Write monitor sync ranges to the configuration file?"
#~ msgstr "是否将显示器同步频率范围写入配置文件？"

#~ msgid ""
#~ "The monitor synchronization ranges should be autodetected by the X server "
#~ "in most cases, but sometimes it needs hinting.  This option is for "
#~ "experienced users, and should be left at its default."
#~ msgstr ""
#~ "在大多数情况下，X 服务器能够自行探测到显示器的同步频率范围，但是有时它还需"
#~ "要一些提示。这一选项是提供给有经验的用户，应该保留其默认值。"

#~ msgid "Monitor's horizontal sync range:"
#~ msgstr "显示器的水平同步频率范围："

#~ msgid ""
#~ "Please enter either a comma-separated list of discrete values (for fixed-"
#~ "frequency displays), or a pair of values separated by a dash (all modern "
#~ "CRT's).  This information should be available in the monitor's manual.  "
#~ "Values lower than 30 or higher than 130 are extremely rare."
#~ msgstr ""
#~ "请输入一个以逗号分隔的列表，每一项或者是独立的数值 (适用于固定频率的显示"
#~ "器)，或者是以横杠 (-) 相连的一对数值 (适用于所有新式 CRT)。这一信息应该能"
#~ "在您的显示器手册中找到。低于 30 或高于 130 的数值都是极其罕见的。"

#~ msgid "Monitor's vertical refresh range:"
#~ msgstr "显示器的垂直刷新频率范围："

#~ msgid ""
#~ "Please enter either a comma-separated list of discrete values (for fixed-"
#~ "frequency displays), or a pair of values separated by a dash (all modern "
#~ "CRT's).  This information should be available in the monitor's manual.  "
#~ "Values lower than 50 or higher than 160 are extremely rare."
#~ msgstr ""
#~ "请输入一个以逗号分隔的列表，每一项或者是独立的数值 (适用于固定频率的显示"
#~ "器)，或者是以横杠 (-) 相连的一对数值 (适用于所有新式 CRT)。这一信息应该能"
#~ "在您的显示器手册中找到。低于 50 或高于 160 的数值都是极其罕见的。"

#~ msgid "Incorrect values entered"
#~ msgstr "输入的值不正确"

#~ msgid ""
#~ "The valid syntax is a comma-separated list of discrete values, or a pair "
#~ "of values separated by a dash."
#~ msgstr ""
#~ "合法的格式是一个以逗号分隔的列表，每一项或者是分立的数值，或者是以横杠 "
#~ "(-) 连接的一对数值。"

#~ msgid "Desired default color depth in bits:"
#~ msgstr "您想要的默认色深 (单位：位)："

#~ msgid ""
#~ "Usually 24-bit color is desirable, but on graphics cards with limited "
#~ "amounts of framebuffer memory, higher resolutions may be achieved at the "
#~ "expense of higher color depth.  Also, some cards support hardware 3D "
#~ "acceleration only for certain depths.  Consult your video card manual for "
#~ "more information."
#~ msgstr ""
#~ "一般来说 24 位色是最好的，但是对有些帧缓冲内存有限的显示卡来说，可能需要牺"
#~ "牲色深来达到更高的分辨率。另外，有些显示卡只在特定的色深下支持硬件 3D 加"
#~ "速。请查阅您的显示卡手册以获得更多信息。"

#~ msgid ""
#~ "So-called \"32-bit color\" is actually 24 bits of color information plus "
#~ "8 bits of alpha channel or simple zero padding; the X Window System can "
#~ "handle both.  If you want either, select 24 bits."
#~ msgstr ""
#~ "所谓的“32 位色”实际是 24 位的色彩信息加上 8 位的 alpha 通道或简单地用零补"
#~ "齐，X 窗口系统对两者都支持。如果你需要两者中的任一种，都请选择 24 位。"

#~ msgid "Write default Files section to configuration file?"
#~ msgstr "是否往配置文件写入默认的 Files 段落内容？"

#~ msgid ""
#~ "The Files section of the X server configuration file tells the X server "
#~ "where to find server modules, the RGB color database, and font files.  "
#~ "This option is recommended to experienced users only.  In most cases, it "
#~ "should be enabled."
#~ msgstr ""
#~ "X 服务器配置文件中的 Files 段落内容会告诉 X 服务器去哪里寻找服务器模块、"
#~ "RGB 色彩数据库，以及字体文件。此选项是为有经验的用户设计。在大部分情况下，"
#~ "您应该开启之。"

#~ msgid ""
#~ "Disable this option if you want to maintain a custom Files section into "
#~ "the X.Org server configuration file.  This may be needed to remove the "
#~ "reference to the local font server, add a reference to a different font "
#~ "server, or rearrange the default set of local font paths."
#~ msgstr ""
#~ "如果您想在 X.Org 服务器配置文件中使用自定义的“Files”段落，请禁用此选项。这"
#~ "可能会需要删除本地字体服务器、增加其它的字体服务器或者重新调整默认的本地字"
#~ "体路径。"

#~ msgid "No X server known for your video hardware"
#~ msgstr "没有适合您的视频硬件设备的 X 服务器"

#~ msgid ""
#~ "There is either no video hardware installed on this machine (e.g. serial "
#~ "console only), or the \"discover\" program was unable to determine which "
#~ "X server is appropriate for the video hardware.  This could be due to "
#~ "incomplete information in discover's hardware database, or because your "
#~ "video hardware is not supported by the available X servers."
#~ msgstr ""
#~ "要么是您这台机器并未安装显示卡 (仅有串行控制台？)，又或者“discover”程序无"
#~ "法确定哪种 X 服务器适用于您的视频硬件设备。这可能是由于 discover 程序的硬"
#~ "件设备资料库所包含的信息不够完整所造成的，或者是您的视频硬件设备根本就不被"
#~ "任何现有的 X 服务器所支持。"

#~ msgid "Multiple potential default X servers for your hardware"
#~ msgstr "多个可能的默认 X 服务器适用于您的硬件"

#~ msgid "Mouse port:"
#~ msgstr "鼠标端口："

#~ msgid ""
#~ "For the X Window System graphical user interface to operate correctly, "
#~ "certain characteristics of the mouse (or other pointing device, such as a "
#~ "trackball) must be known."
#~ msgstr ""
#~ "要能正确操作 X 窗口系统的图形用户界面，系统必须知道您的鼠标 (或其它指点设"
#~ "备，例如轨迹球) 的某些特征指标。"

#~ msgid ""
#~ "It is necessary to determine which port (connection type) is used by the "
#~ "mouse. Serial ports use D-shaped connectors with 9 or 25 pins (a.k.a. DB-"
#~ "9 or DB-25); the mouse connector is female (has holes) and the computer "
#~ "connector is male (has pins).  PS/2 ports are small round connectors "
#~ "(DIN) with 6 pins; the mouse connector is male and the computer side "
#~ "female.  You may alternatively use a USB mouse, a bus/inport (very old) "
#~ "mouse, or be using the gpm program as a repeater.  If you need to attach "
#~ "or remove PS/2 or bus/inport devices from your computer, please do so "
#~ "with the computer's power off."
#~ msgstr ""
#~ "系统必须知道您的鼠标使用的是哪个端口 (连接类型)。串行端口使用的是 9 针或 "
#~ "15 针的 D 形插口 (即 DB-9 或 DB-25)，其中鼠标插头是母 (洞)，计算机上的插座"
#~ "是公 (针)。PS/2 端口则是 6 针的小圆口 (DIN)，其中鼠标插头是公，计算机上的"
#~ "插座是母。您所使用的还可能是 USB 鼠标、bus/inport 鼠标 (很旧的型号) 或者使"
#~ "用 gpm 程序作为中继器。如果您需要从计算机上插拔 PS/2 或 bus/inport 设备，"
#~ "请关闭电源后再进行操作。"

#~ msgid "Mouse protocol:"
#~ msgstr "鼠标协议："

#~ msgid "Emulate 3 button mouse?"
#~ msgstr "模拟 3 键鼠标？"

#~ msgid ""
#~ "Most programs in the X Window System expect the mouse to have 3 buttons "
#~ "(left, right, and middle).  Mice with only 2 buttons can emulate the "
#~ "presence of a middle button by treating simultaneous clicks or drags of "
#~ "the left and right buttons as middle button events."
#~ msgstr ""
#~ "X 窗口系统中的大部分程序都期望您的的鼠标拥有 3 个按键 (左、右、中)。只有 "
#~ "2 键的鼠标可以通过同时摁下或拖动左键和右键来模拟中键行为。"

#~ msgid ""
#~ "This option may also be used on mice with 3 or more buttons; the middle "
#~ "button will continue to work normally."
#~ msgstr "此选项也可被用在 3 键或更多键的鼠标上，中键将继续按通常方式工作。"

#~ msgid ""
#~ "Note that mouse buttons in excess of five (counting a scroll wheel as two "
#~ "buttons, one each for \"up\" and \"down\", and a third if the wheel "
#~ "\"clicks\") are not yet supported with this configuration tool."
#~ msgstr ""
#~ "注意，本配置工具并不支持超过 5 个以外的鼠标按键 (鼠标滚轮算两个按键，分别"
#~ "是“上”和“下”，如果滚轮还可以点击的话就算是三个按键)。"

#~ msgid "Attempt mouse device autodetection?"
#~ msgstr "尝试鼠标自动探测吗？"

#~ msgid ""
#~ "If a mouse is attached to the computer, autodetection can be attempted; "
#~ "it may help to move the mouse while detection is attempted (the gpm "
#~ "program should be stopped if it is used).  Plugging  a PS/2 or bus/inport "
#~ "mouse now requires rebooting."
#~ msgstr ""
#~ "如果鼠标已被插到计算机上，则可以试试自动探测。在探测过程中移动鼠标可能会有"
#~ "所帮助 (如果使用了 gpm 程序的话，应该停止它)。插入 PS/2 或 bus/inport 型鼠"
#~ "标需要重启计算机。"

#~ msgid ""
#~ "Do not choose this option if you wish to select a mouse type manually."
#~ msgstr "如果您想手动选择鼠标类型，请不要选中此项。"

#~ msgid ""
#~ "If you choose it and autodetection fails, you will be asked this question "
#~ "again.  Autodetection can be attempted as many times as desired.  If it "
#~ "succeeds, further configuration questions about the mouse will be pre-"
#~ "answered."
#~ msgstr ""
#~ "如果您同意此选项，但自动探测却失败了，程序将再次向您提出此问题。您可以按需"
#~ "要进行任意次数的自动探测。如果探测成功，接下来有关鼠标的配置问题都将被预置"
#~ "答案。"

#~ msgid "Identifier for the monitor:"
#~ msgstr "显示器标识符："

#~ msgid ""
#~ "The X server configuration file associates the monitor with a name that "
#~ "you may provide.  This is usually the vendor or brand name followed by "
#~ "the model name, e.g., \"Sony E200\" or \"Dell E770s\"."
#~ msgstr ""
#~ "X 服务器的配置文件会给您的显示器取一个标识名称，这个名称可以由您提供。通常"
#~ "该名称由厂商或品牌名加上型号组成，例如“Sony E200”或“Dell E770s”。"

#~ msgid "Amount of memory (kB) to be used by the video card:"
#~ msgstr "请输入您的显示卡所使用的内存大小 (单位：kB)："

#~ msgid ""
#~ "Typically, the amount of dedicated memory used by the video card is "
#~ "autodetected by the X server, but some integrated video chips (such as "
#~ "the Intel i810) have little or no video memory of their own, and instead "
#~ "borrow main system memory for their needs."
#~ msgstr ""
#~ "一般来说，您的显示卡所拥有的显存大小可以被 X 服务器自动探测到。但是某些集"
#~ "成显示芯片 (例如 Intel i810) 本身没有或只有很少显存，他们将会根据需要从系"
#~ "统主内存中借用。"

#~ msgid ""
#~ "This parameter should usually be left blank and specified only if the "
#~ "video card lacks RAM, or if the X server has trouble autodetecting the "
#~ "RAM size."
#~ msgstr ""
#~ "将此参数留空就很好。只有在您的显卡缺少显存或 X 服务器无法自动探测显存大小"
#~ "时，您才有必要指定显存的大小。"

#~ msgid "Desired default X server:"
#~ msgstr "请选择您所期望的默认 X 服务器："

#~ msgid ""
#~ "The X server is the hardware interface of the X Window System.  It "
#~ "communicates with the video display and input devices, providing a "
#~ "foundation for the chosen Graphical User Interface (GUI)."
#~ msgstr ""
#~ "X 服务器乃是 X 窗口系统的硬件接口。它的任务是与视频显示和输入设备通讯，为"
#~ "所选的图形用户界面(GUI)提供底层支持。"

#~ msgid ""
#~ "Several X servers may be available; the default is selected via the /etc/"
#~ "X11/X symbolic link.  Some X servers may not work with some particular "
#~ "graphics hardware."
#~ msgstr ""
#~ "系统中有多个可用的 X 服务器，其中默认服务器是通过 /etc/X11/X 符号链接被选"
#~ "定。一些 X 服务器可能无法在您特有的图形硬件设备上工作。"

#~ msgid "X.Org server modules that should be loaded by default:"
#~ msgstr "请选择应该默认被加载的 X.Org 服务器模块："

#~ msgid ""
#~ "This option is recommended to experienced users only.  In most cases, all "
#~ "of these modules should be enabled."
#~ msgstr ""
#~ "此选项仅推荐给有经验的用户使用。大多数情况下，所有这些模块都应该被加载。"

#, fuzzy
#~ msgid ""
#~ " - glx   : support for OpenGL rendering;\n"
#~ " - dri   : support in the X server for DRI (Direct Rendering "
#~ "Infrastructure);\n"
#~ " - vbe   : support for VESA BIOS Extensions. Allows querying\n"
#~ "           the monitor capabilities via the video card;\n"
#~ " - ddc   : support for Data Display Channel. Allows querying\n"
#~ "           the monitor capabilities via the video card;\n"
#~ " - int10 : real-mode x86 emulator used to softboot secondary VGA cards.\n"
#~ "           Should be enabled if vbe is enabled;\n"
#~ " - dbe   : enables the double-buffering extension in the server.\n"
#~ "           Useful for animation and video operations;\n"
#~ " - extmod: enables many traditional and commonly used extensions, such "
#~ "as\n"
#~ "           shaped windows, shared memory, video mode switching, DGA, and "
#~ "Xv;\n"
#~ " - record: implements the RECORD extension, often used in server "
#~ "testing;\n"
#~ " - bitmap: font rasterizer (so are freetype, and type1 modules)."
#~ msgstr ""
#~ " - glx   ：提供 OpenGL 渲染支持；\n"
#~ " - dri   ：为 X 服务器提供 DRI (基层直接渲染) 支持；\n"
#~ " - vbe   ：提供 VESA BIOS 扩展支持。允许通过显卡查询显示器的参数。\n"
#~ " - ddc   ：提供数据显示通道 (Data Display Channel) 支持。允许通过显卡查"
#~ "询\n"
#~ "           显示器的参数；\n"
#~ " - int10 ：用于软启动第二 VGA 卡的实模式 x86 模拟。如果 vbe 被开启，\n"
#~ "           它也应该开启。\n"
#~ " - dbe   ：为服务器提供双缓冲扩展 (double-buffering extension)。对动画和\n"
#~ "           视频操作很有用；\n"
#~ " - extmod：开启多个传统并广泛使用的扩展，例如阴影窗口 (shaped windows)、\n"
#~ "           共享内存 (shared memory)、视频模式切换 (video mode "
#~ "switching)、\n"
#~ "           DGA 和 Xv；\n"
#~ " - record：RECORD 扩展实现，通常用于服务器测试；\n"
#~ " - bitmap：字体光栅 (同样还有 freetype 和 type1 模块)。"

#~ msgid ""
#~ "For further information about these modules, please consult the X.Org "
#~ "documentation."
#~ msgstr "更多有关这些模块的信息，请参考 X.Org 文档。"

#~ msgid ""
#~ "Up to 14 inches (355 mm), 15 inches (380 mm), 17 inches (430 mm), 19-20 "
#~ "inches (480-510 mm), 21 inches (530 mm) or more"
#~ msgstr ""
#~ "最大 14 英寸(355 毫米), 15 英寸(380 毫米), 17 英寸(430 毫米), 19-20 英寸 "
#~ "(480-510 毫米), 21 英寸(530 毫米)或更大"